Stationary 5 m3 Type


Features

  • Movable by 1.5t forklift.
  • Outstanding mobility, and highest pumping out-put among line-ups.
  • Pumping high consistency low cement amorphous refractory material.

Specifications

SP−5E
▼
Type Stationary Diesel Engine
Output max.theor. 1～5㎥/h
Front Pressure of Concrete Piston 10.7MPa (108.4kgf/㎠)
Maximum Aggregate Size 15㎜
Diameter of Delivery Port 65㎜
Pumping System Hydraulic 2-Piston system
Valve System Parallel sliding type
Material Cylinder φ 70㎜ × Stroke 550㎜
Hopper Structure Hydraulic Opening and closing system
Capacity 0.13㎥
Height 1106㎜
Agitator Hydraulic Motor system (normal･stop･reverse_rotation)
Automatic stop device equipped
Power Diesel Engine (3-cylinder ) ( water-cooling )
2 Type : 22.8kW/2600rpm and 23.1kW/2500rpm
Fuel Tank 48L
Hydraulic Oil Tank 64L
Lubrication Oil Tank 27L (for Material Cylinder Cleaning)
Machine Size L 2205㎜ × W 1044㎜ × H 1492㎜ (include 4 Legs)
Gross Weight 1350㎏ (include Hydraulic Oil)

SP−5M
▼
Type Stationary Electric Motor
Output max.theor. 1～5㎥/h
Front Pressure of Concrete Piston 10.7MPa (108.4kgf/㎠)
Maximum Aggregate Size 15㎜
Diameter of Delivery Port 65㎜
Pumping System Hydraulic 2-Piston system
Valve System Parallel sliding type
Material Cylinder φ 70㎜ × Stroke 550㎜
Hopper Structure Hydraulic Opening and closing system
Capacity 0.13㎥
Height 1106㎜
Agitator Hydraulic Motor system (normal･stop･reverse_rotation)
Automatic stop device equipped
Power Electric Motor (Star-Delta Starting Method)
22kW
4P・200V (50Hz / 60Hz)
Fuel Tank -
Hydraulic Oil Tank 64L
Lubrication Oil Tank 27L (for Material Cylinder Cleaning)
Machine Size L 2205㎜ × W 1044㎜ × H 1492㎜ (include 4 Legs)
Gross Weight 1300㎏ (include Hydraulic Oil)
Note: Specifications and the other contents on this catalogue are subject to change without prior notice due to design revision.

Performance Diagram

SP-5E
SP-5M

Outside Dimension

SP-5E

SP-5M

PAGE TOP